SE ELECTRONICS - SE-DM2 - ACTIVE DYNAMIC MICROPHONE PREAMP - TNT DM2 - VARIABLE IMPEDANCE / GAIN

The DM2 TNT : explosive level for all your dynamics mics.

For all your dynamic and passive ribbon microphones, perfect for podcasting, recording, or live sound.
The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any dynamic microphone.

With a sophisticated class-A design and specially-selected high-grade FETs, sE active inline preamps have vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain provided is always consistent regardless of the connected load.

Whether you’re a podcaster, recording engineer, or running live sound, sE inline preamps are the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration.




FEATURES :

- SWITCHABLE, CLEAN AND CONSTITENT GAIN FROM +15dB to
+30dB
-SOPHISTICATED CLASS-A ELECTRONICS
-DEDICATED OUTPUT BUFFER AMPLIFIER
-SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH



SPECS :

-Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)
-Gain: 15 dB / 30 dB
-Max output level (0.5% THD): 9.5 dBV (3.0 V)
-Output noise level: 1 μV @ 15 dB / 6.6 μV @ 30 dB
-Powering: 48 Volts according to IEC 61938
-Electrical impedance: 135 Ohms
-Recommended load impedance: >1k Ohms
-Current consumption: 3.1 mA
-Connectivity: 3-pin male/female XLR connector
-Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)
-Weight: 80 g (2.82 oz.)