SE ELECTRONICS - SE-DM1 - ACTIVE DYNAMIC MICROPHONE PREAMP - DYNAMITE DM1

DM1 DYNAMITE: explosive level for all your dynamics mics.


For all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound.
The DM1 DYNAMITE provides a massive +28dB of clean, transparent gain.

With a sophisticated class-A design and specially-selected high-grade FETs, sE active inline preamps have vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain provided is always consistent regardless of the connected load.

Whether you’re a podcaster, recording engineer, or running live sound, sE inline preamps are the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration.



FEATURES :

- +28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD
-SOPHISTICATED CLASS-A ELECTRONICS
-DEDICATED OUTPUT BUFFER AMPLIFIER
-SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH



SPECS :

-Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)
-Gain: 28 dB (load 1kOhms)
-Max output level (0.5% THD): 8.3 dBV (2.6 V)
-Output noise level: 9 μV (JIS-A)
-Powering: 48 Volts according to IEC 61938
-Electrical impedance: 135 Ohms
-Recommended load impedance: >1k Ohms
-Current consumption: 3.0 mA
-Connectivity: 3-pin male/female XLR connector
-Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)
-Weight: 80 g (2.82 oz.)